Hello, again. This is Trey.
Welcome to part 6 in my Cheap Yellow Display (CYD) Project series. Thank you for hanging in there with me on this rambling series. If you wish to catch up on earlier episodes, you can find them on my
HPR profile page
https://www.hackerpublicradio.org/correspondents/0394.html
To review, my project is to build a portable morse code "Keyer memory" which can be connected to any of my amateur HF transceiver radios by simply plugging it in to the code key input port. This is based around an ESP32 platform which comes prepackaged on a yellow PC board with a color touchscreen display, WIFI, and Bluetooth. We fondly call this contraption the Cheap Yellow Display.
So far, I have defined the necessities, collected the required hardware, and failed miserably building the graphical user interface (GUI).
While I sort out the technical challenges getting my GUI code to play nicely with the CYD's touchscreen, it is important that we spend some time discussing Morse code itself, and the timing standards we will need to follow.
I am not going to dive too deeply into the history behind telegraphs and Morse code, but it is very interesting. If you want to learn more, Wikipedia has the origins and evolution written out quite nicely at
https://en.wikipedia.org/wiki/Morse_code
For our purposes, we will fast forward from the year 1820 (When telegraphy began) all the way to 1865 when the International Telecommunication Union (ITU) standardized, what it called "International Morse Code". When I say Morse Code for the remainder of this podcast, I am referring to this ITU International Morse Code.
Morse code typically includes the following characters:
The 26 letter basic Latin alphabet
The Indo-Arabic numerals 0 to 9
There is also a single accented Latin letter (É), which is written as an E with an accent mark, and a handful of punctuation marks.
These characters are encoded using a sequence of short and long signals. Each short signal is referred to as a
dit
. Each long signal is referred to as a
dah
. At a young age,
All content for Hacker Public Radio is the property of Hacker Public Radio and is served directly from their servers
with no modification, redirects, or rehosting. The podcast is not affiliated with or endorsed by Podjoint in any way.
Hello, again. This is Trey.
Welcome to part 6 in my Cheap Yellow Display (CYD) Project series. Thank you for hanging in there with me on this rambling series. If you wish to catch up on earlier episodes, you can find them on my
HPR profile page
https://www.hackerpublicradio.org/correspondents/0394.html
To review, my project is to build a portable morse code "Keyer memory" which can be connected to any of my amateur HF transceiver radios by simply plugging it in to the code key input port. This is based around an ESP32 platform which comes prepackaged on a yellow PC board with a color touchscreen display, WIFI, and Bluetooth. We fondly call this contraption the Cheap Yellow Display.
So far, I have defined the necessities, collected the required hardware, and failed miserably building the graphical user interface (GUI).
While I sort out the technical challenges getting my GUI code to play nicely with the CYD's touchscreen, it is important that we spend some time discussing Morse code itself, and the timing standards we will need to follow.
I am not going to dive too deeply into the history behind telegraphs and Morse code, but it is very interesting. If you want to learn more, Wikipedia has the origins and evolution written out quite nicely at
https://en.wikipedia.org/wiki/Morse_code
For our purposes, we will fast forward from the year 1820 (When telegraphy began) all the way to 1865 when the International Telecommunication Union (ITU) standardized, what it called "International Morse Code". When I say Morse Code for the remainder of this podcast, I am referring to this ITU International Morse Code.
Morse code typically includes the following characters:
The 26 letter basic Latin alphabet
The Indo-Arabic numerals 0 to 9
There is also a single accented Latin letter (É), which is written as an E with an accent mark, and a handful of punctuation marks.
These characters are encoded using a sequence of short and long signals. Each short signal is referred to as a
dit
. Each long signal is referred to as a
dah
. At a young age,
This brings us to a look at some of Arthur C. Clarke's other
stories, The Sands of Mars (1951), The Deep Range (1957), and The
Fountains of Paradise (1979). These are just a few of his
well-regarded stand-alone novels.
Links:
https://www.sffworld.com/forum/threads/the-clarke-asimov-treaty.46067/
https://en.wikipedia.org/wiki/The_Sands_of_Mars
https://en.wikipedia.org/wiki/Islands_in_the_Sky
https://en.wikipedia.org/wiki/Earthlight
https://en.wikipedia.org/wiki/The_Space_Trilogy
https://en.wikipedia.org/wiki/The_Deep_Range
https://en.wikipedia.org/wiki/Dolphin_Island_(novel)
https://en.wikipedia.org/wiki/The_Ghost_from_the_Grand_Banks
https://en.wikipedia.org/wiki/The_Fountains_of_Paradise
https://en.wikipedia.org/wiki/Buckminsterfullerene
https://en.wikipedia.org/wiki/The_Man_Who_Sold_the_Moon
https://www.palain.com/science-fiction/the-golden-age/arthur-c-clarke-other-novels-part-1/
Hacker Public Radio
Hello, again. This is Trey.
Welcome to part 6 in my Cheap Yellow Display (CYD) Project series. Thank you for hanging in there with me on this rambling series. If you wish to catch up on earlier episodes, you can find them on my
HPR profile page
https://www.hackerpublicradio.org/correspondents/0394.html
To review, my project is to build a portable morse code "Keyer memory" which can be connected to any of my amateur HF transceiver radios by simply plugging it in to the code key input port. This is based around an ESP32 platform which comes prepackaged on a yellow PC board with a color touchscreen display, WIFI, and Bluetooth. We fondly call this contraption the Cheap Yellow Display.
So far, I have defined the necessities, collected the required hardware, and failed miserably building the graphical user interface (GUI).
While I sort out the technical challenges getting my GUI code to play nicely with the CYD's touchscreen, it is important that we spend some time discussing Morse code itself, and the timing standards we will need to follow.
I am not going to dive too deeply into the history behind telegraphs and Morse code, but it is very interesting. If you want to learn more, Wikipedia has the origins and evolution written out quite nicely at
https://en.wikipedia.org/wiki/Morse_code
For our purposes, we will fast forward from the year 1820 (When telegraphy began) all the way to 1865 when the International Telecommunication Union (ITU) standardized, what it called "International Morse Code". When I say Morse Code for the remainder of this podcast, I am referring to this ITU International Morse Code.
Morse code typically includes the following characters:
The 26 letter basic Latin alphabet
The Indo-Arabic numerals 0 to 9
There is also a single accented Latin letter (É), which is written as an E with an accent mark, and a handful of punctuation marks.
These characters are encoded using a sequence of short and long signals. Each short signal is referred to as a
dit
. Each long signal is referred to as a
dah
. At a young age,
