Three ways to get faster (or avoid slowing down) in training.
Timestamps
00:45 Can you increase the average speed of your boat?
The net of how fast it accelerates in the power phase and how much it slows in the recovery phase.
Our past episode about how to get speed on the recovery
https://youtube.com/live/RRF3o7LxNXM
01:45 Row to the Conditions
Pay attention to the water surface, to the wind and waves, to the water swirls under a bridge. This allows you to make subtle changes to how your boat is moving.
Rowing in a headwind - at the start the waves are highest (they've progressively built up) and these lower as you get closer to the end of 1k. With large waves you cannot rate high. When rowing to the conditions as you notice the wave height reducing, push on and increase the rate by half a point. You can also change the ratio (intensity through the water compared to relaxation up the slide).
04:30 No huge moves
If you do a big push the chances are you will suffer a large fall off in boat speed after the push is done. Choose moderate moves and you are more likely to be able to hold the new boat speed after it ends. Make your moves sustainable longer.
Pushing hard means you may compensate by trying to save energy and your pace judgement may suffer.
06:00 Avoid rowing in dirty water
The puddles of the crew in front are disturbed water. When the water block is churned by someone else's oar it makes the water unstable and hard for you to get your oar to grip the water. This affects the boat run and your ability to put energy into pushing the boat forwards.
When rowing near other crews, put their puddles under your riggers - between the hull and your spoon. The disturbed water will neither affect the run of your hull nor your spoon grip on the water.
Rowing in dirty water is hard to avoid if your eight has an unconventional rig (Two people on the same side in sweep eights) this may result in bow and stroke being on the same side. Only the fastest mens eights can avoid stroke rowing into bow's previous puddle.
Want live streams like this? https://streamyard.com/pal/c/5694205242376192
All content for RowingChat is the property of Rebecca Caroe and is served directly from their servers
with no modification, redirects, or rehosting. The podcast is not affiliated with or endorsed by Podjoint in any way.
Three ways to get faster (or avoid slowing down) in training.
Timestamps
00:45 Can you increase the average speed of your boat?
The net of how fast it accelerates in the power phase and how much it slows in the recovery phase.
Our past episode about how to get speed on the recovery
https://youtube.com/live/RRF3o7LxNXM
01:45 Row to the Conditions
Pay attention to the water surface, to the wind and waves, to the water swirls under a bridge. This allows you to make subtle changes to how your boat is moving.
Rowing in a headwind - at the start the waves are highest (they've progressively built up) and these lower as you get closer to the end of 1k. With large waves you cannot rate high. When rowing to the conditions as you notice the wave height reducing, push on and increase the rate by half a point. You can also change the ratio (intensity through the water compared to relaxation up the slide).
04:30 No huge moves
If you do a big push the chances are you will suffer a large fall off in boat speed after the push is done. Choose moderate moves and you are more likely to be able to hold the new boat speed after it ends. Make your moves sustainable longer.
Pushing hard means you may compensate by trying to save energy and your pace judgement may suffer.
06:00 Avoid rowing in dirty water
The puddles of the crew in front are disturbed water. When the water block is churned by someone else's oar it makes the water unstable and hard for you to get your oar to grip the water. This affects the boat run and your ability to put energy into pushing the boat forwards.
When rowing near other crews, put their puddles under your riggers - between the hull and your spoon. The disturbed water will neither affect the run of your hull nor your spoon grip on the water.
Rowing in dirty water is hard to avoid if your eight has an unconventional rig (Two people on the same side in sweep eights) this may result in bow and stroke being on the same side. Only the fastest mens eights can avoid stroke rowing into bow's previous puddle.
Want live streams like this? https://streamyard.com/pal/c/5694205242376192
Learn how to back down a rowing boat.
Timestamps
00:45 Struggling to learn how to back the boat
Blades up or blades down when backing?
Different countries do this differently - UK is blades down and NZ is blades up.
Blades down rationale - the oar spoon is curved and you want the curve to grip the water and push it backwards. Blades up rationale - the oar has pitch on it from the oarlock tilts the blade - this makes the oar go the wrong way and may cause the oar to dive into the water.
My personal view is don’t turn your blades upside down (they are angled and the diving (being sucked down) you experienced is because the pitch / angle of the spoon is designed for the oar the right way up (not upside down).
It's simpler to leave the oar blades up - because it's always the same whether rowing normally or backing.
04:00 How to learn backing down
Two videos you can use to learn shared lower down.
1 - Start by sitting legs straight and arms straight with oars square and under the water surface. Scullers ensure your hands are nested tightly. Sweep rowers ensure the boat is level by having upward pressure on your thumbs. This shows the height the handle needs to be at to keep the boat level
2 - Begin with rowing in place. This is only moving your arms just pulling the handles towards you and pushing them away without taking the oars out of the water. Keep the handles at the same height throughout. Don't take the oars out of the water. Get the feeling of backing down.
Notice that your handle height is key to getting this right. Diving or sucking down into the water happens when your handles go too high.
3 - Now progress to backing down with arms and body rowing in place first
4 - Then start backing down arms only; arms and body; then go to half slide and longer to full slide.
09:00 Counter-feather the oars
5 - Keep the oars on the surface when they are not being used to back the boat. Remember to counter-feather your blades and run the tip of the oar along the water surface when they are out of the water in between backing strokes. Keeping them on the surface means you maintain the boat set/balance. This gives you a point of reference as to where horizontal is to keep the boat level - it shows you how high to have your handles when the oars are out of the water.
Remember the catch when backing down starts with the oars next to your body. It may help to learn counter-feathering one side at a time. You can hold the boat level with just one oar.
11:20 two videos to teach you backing down skill
Here’s a video about improving your backing skills https://www.youtube.com/watch?v=B4CODkUdEGc
And another about turning the boat which demonstrates the counter-feathered oar https://youtu.be/ThTrg1N6Obg
A final recommendation - get confident backing with good pressure. Try practicing 100 meters of backing down each time you go rowing.
RowingChat
Three ways to get faster (or avoid slowing down) in training.
Timestamps
00:45 Can you increase the average speed of your boat?
The net of how fast it accelerates in the power phase and how much it slows in the recovery phase.
Our past episode about how to get speed on the recovery
https://youtube.com/live/RRF3o7LxNXM
01:45 Row to the Conditions
Pay attention to the water surface, to the wind and waves, to the water swirls under a bridge. This allows you to make subtle changes to how your boat is moving.
Rowing in a headwind - at the start the waves are highest (they've progressively built up) and these lower as you get closer to the end of 1k. With large waves you cannot rate high. When rowing to the conditions as you notice the wave height reducing, push on and increase the rate by half a point. You can also change the ratio (intensity through the water compared to relaxation up the slide).
04:30 No huge moves
If you do a big push the chances are you will suffer a large fall off in boat speed after the push is done. Choose moderate moves and you are more likely to be able to hold the new boat speed after it ends. Make your moves sustainable longer.
Pushing hard means you may compensate by trying to save energy and your pace judgement may suffer.
06:00 Avoid rowing in dirty water
The puddles of the crew in front are disturbed water. When the water block is churned by someone else's oar it makes the water unstable and hard for you to get your oar to grip the water. This affects the boat run and your ability to put energy into pushing the boat forwards.
When rowing near other crews, put their puddles under your riggers - between the hull and your spoon. The disturbed water will neither affect the run of your hull nor your spoon grip on the water.
Rowing in dirty water is hard to avoid if your eight has an unconventional rig (Two people on the same side in sweep eights) this may result in bow and stroke being on the same side. Only the fastest mens eights can avoid stroke rowing into bow's previous puddle.
Want live streams like this? https://streamyard.com/pal/c/5694205242376192