The podcast about 3D printing and digital fabrication: Stefan Hermann (CNC Kitchen) and Thomas Sanladerer discuss new developments, answer community questions and talk about what's hot in the world of making!
All content for The Meltzone is the property of Stefan Hermann & Thomas Sanladerer and is served directly from their servers
with no modification, redirects, or rehosting. The podcast is not affiliated with or endorsed by Podjoint in any way.
The podcast about 3D printing and digital fabrication: Stefan Hermann (CNC Kitchen) and Thomas Sanladerer discuss new developments, answer community questions and talk about what's hot in the world of making!
Thanks to Siraya Tech for sponsoring this episode! Check them out at https://siraya.tech/products/build-resin-high-resolution-engineering-resin or on Amazon at http://go.toms3d.org/Siraya
In this episode, Stefan talks about what recently put him out of order for almost 4 weeks but how he used the time to discover some amazing new channels. Tom talks about his experience of redeeming his Prusameters and his recent CF lamination projects. Both quickly discuss their most recent videos on obsolete 0.4 mm nozzles and obsolete Volcano hotends. Next, they go through Prusa's recent blog post in which the latest developments regarding the Prusa XL are discussed. Finally, Tom and Stefan talk about their plans with the upcoming ObXidian nozzle and the scam comments they were both victims of.
The Meltzone
The podcast about 3D printing and digital fabrication: Stefan Hermann (CNC Kitchen) and Thomas Sanladerer discuss new developments, answer community questions and talk about what's hot in the world of making!
